Contact LLV

Address: Wuxing Industrial Zone,Oubei Town,Wenzhou City,China
Tel: 0086-577-67138816
Fax: 0086-577-67138806
E-mail: sara@valvellv.com
Skype: saravalve

TOP ENTRY BALL VALVES

TOP ENTRY BALL VALVES

TOP ENTRY BALL VALVE is mainly used in pipeline and industry system and it has a top entry and on line maintenance function. It has a lot of advantages ,such as small fluid resistance, simple structure, small volume, light weight, reliable saaling, convenience for operation and maintenance, open and close quickly, as well as start and close flexibly.
OnLine Service
Skype Online PDF Download
【Prev Products】 【Next Products】

Description

TOP ENTRY BALL VALVE BRIEFING INTRODUCTION:


One piece body
One piece body is used for the body to guarantee sufficient strength and rigidity under maximum rated operating pressure. The internal parts of valve are carefully designed and selected to ensure reliability under all kinds of operating condition. Enough margin wall thickness and adaptation of high strength connective bolts are convenient for valve maitenance and sufficiency to support the stress from piping.

Top entry
Its most difference from common ball valve is that its maintenance can be made on pipe line and without dismounting from the pipe line. The back space seat structure is adopted for the seat and the rear portion of seat retainer is oblique angle to prevent accumulation of impurity from affecting back space of seat.

Low operation torque
LLV top entry series ball valve has a trunnion mounted ball, whose surface is ground,polished and hard face treated.The ball and stem is integrated,sliding bearing is installed on the external bore so that the friction radius is small and operation torque is very low.




FEATURES

Size: 2"~40"

Class: 150~1500Lb

The Monolithic Cast Steel Body

Floating & Trunnion Mounted Ball, Full & Reduced Bore

Anti-static Device

Blow-out Proof Stem

Fire Safe Design

SPECIFICATIONS

Design

ASME B16.34/API 6D

Face to Face

ASME B16.10

End Flange

ASME B16.5

BW End

ASME B16.25

Test

API 598/API 6D

Fire Safe Test

API 607/API 6FA

Special

NACE MR-01-75

Application

WaterOilGas

STANDARD MATERIAL LIST

No.

Parts Name

Material

1

Body

A216 WCB, A352 LCB, A351 CF8, CF8M, CF3, CF3M,Duplex

2

Seat Spring

Inconel X-7505, SS304, SS316

3

Seat Ring

A105+ENP, A182 F6, F304, F304L, F316, F316L, F51

4

Seat

PTFE, R-PTFE, PEEK, PPL

5

Ball

A105+ENP, A182 F6, F304, F304L, F316, F316L, F51

6

O-ring

NBR, Viton

7

Thrust Washer

PTFE

8

Body Gasket

SS304+PTFE, SS316+PTFE

9

Sliding Bearing

PTFE, SS304+Graphite, SS316+Graphite

10

Bonnet

A216 WCB, A352 LCB, A351 CF8, CF8M, CF3, CF3M,Duplex

11

Packing

PTFE, Graphite

12

Gland Flange

A216 WCB, A351 CF8

13

Key

1045, A182 F304, F304L, F316, F316L

14

Stem

A105+ENP, A182 F6, F304, F304L, F316, F316L, F51

15

Yoke

A216 WCB

16

Nut

A194 2H, 2HM, 8, 8M

17

Stud

A193 B7, B7M, B8, B8M

18

Vent Valve

1020+ZN, A182 F304, F304L, F316, F316L

19

Lifting Lug

1020

20

Seat Injection

1020+ZN, A182 F304, F304L, F316, F316L

21

Steel Ball

Stainless Steel

22

Adjusting Ring

1045+N, A182 F304, F304L, F316, F316L

23

Seat Spring

1045+N, A182 F304, F304L, F316, F316L

24

Steel Gasket

1045+N, A182 F304, F304L, F316, F316L

25

Trunnion

A105+ENP, A182 F6, F304, F304L, F316, F316L, F51

26

Trunnion Gasket

PTFE, SS304+Graphite

27

Adjusting Nut

A194 2H, 8

28

Adjusting Stud

A182 F6, F304

29

Drain Valve

1020+N, A182 F304, F304L, F316, F316L


Emergency sealing

Compound injection holes are designed and compound injection valves are installed at locations of stem/cap and body support of side valve.When sealing of stem or seat is damaged to induce leakage,the compound can be used to do the second time sealing.A concealed check valve is installed in side of each compound injection valve to prevent compound from out flowing due to the action of transmitter substance.The top of the compound injection valve is the connector for fast connection with compound injection gun.

Reliable sealing

The seat sealing is formed by seat sealing and metal retainer component.The seat retainer floats axially and low pressure sealing of valve seat is reached by pre-pressure of spring.In addition,the piston effect of valve seat is designed reasonably,which realized high pressure sealing by the pressure of operating medium and realize the interception of retainer to form the sealing of the body.The expansion graphite ring is designed to realize sealing under fire condition.

Double block&bleed(DBB)

When ball is full open or close position,the transmitter substance in center cavity of body can be released by drainage and emptying devices.In addition,the over loaded pressure in the center cavity of valve can be released to low pressure end by self relief seat.

Anti-static and fire safe design

The fire prevention design of valve meets the requirement in API6FA/API607 standard and the design of the anti-static conforms to regulations in API6D and BS5351.

Extension stem

For the underground installed valve,the stem can be lengthened and for the convenience of operation the corresponding compound injection nozzle and drainage valve can be extended to the top of valve.

Various driving types

The top pad of valve designed according to ISO 5211,which is convenient for connection and exchange of various drivers.The common driving types are manual,electrical,pneumatic and pneumatic/hydraulic.



Send Inquiry

If you have any enquiry about quotation or cooperation,please feel free to email us at sara@valvellv.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

  • Subject:
  • *Name:
  • *E-mail:
  • Company Name:
  • Tel:
  • Fax:
  • Country:
  • Products:
  • Message:

Related Products