Cast Steel Y type Strainer
|Skype Online||PDF Download|
|【Prev Products】||【Next Products】|
Cast Steel Flange ends API Standard Y Type Strainer 150LB~1500LB
Medium: liquids, steams, gases or mixtures
Flange nominal width: DN 15 to 1200 (1/2" to 48")
Operating Pressure: PN 16 to PN 250* (ANSI 150 to ANSI 1500 lbs)*
Filter fineness (Mesh sizes): 400 μm* (Standard) or s per to customer's requirement
Connection Flanges acc. to ANSI / DIN
Housing: 1.0169 (A216 WCB) 1.4408 (A315 CF8M)
Filter element: 1.4401 (316)
Surface treatment: one coat of red oxide* (carbon steel)
Fitting position: Horizontal or vertical
Direction of flow: lateral or from top to down
1. Basic design and manufacture according to ANSI B16.34.
2. Flange connection per ASME B16.5.
3. Inspection and tested according to API 598.
Design and Operation:
The -Strainers consists of a housing with opposite arranged inand outlet flanges at the same level. Between these connections is a basket strainer made of a perforated plate, optionally covered with a cloth consisting of various materials and mesh widths. The medium to be filtered will enter the filter from the inside to the outside. Hence, the contaminations will remain within the strainer insert. The Y-Strainer could be depressurizing through the venting or draining devices. After removing of the flap the complete basket strainer could be easily removed out of the filter housing. Now the strainer can be cleaned by blowing out or blasting using compressed air, steam, or water. If necessary, the strainer should be soaked and cleaned using a suitable agent. Possibly, an optimal cleaning will be obtained using ultrasonics. The housing could be manufactured by forged steel, cast iron or a weldment (pipes and flanges). Y-Strainer can be installed both in the horizontal and vertical positions without any effect on performance providing the screen is installed in the downward position to assist draining and cleaning operations.
If you have any enquiry about quotation or cooperation,please feel free to email us at email@example.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.